turbo advice?

[Mr. King]

I was hoping to upgrade turbos soon. I have a fairly stock redtop sr20 and was wanting something that would maintain quick response, affordable, and a bit more peppy than the t25. I'm extremely interested in the Forced Performance Big28 turbo. However, I have access to a used "disco potato" that I could pick up for a very reasonable price. Does anyone on here have any first hand experience with both turbos? If so any input on which you prefered and why would be appreciated.

[cbeuglas]

If you are gong to run those I would upgrade injectors and the maf. Stock maf won't handle much boost.

[cbeuglas]

You can get the isis t25 replacement turbo and run no more that 12 lbs on stock maf and injectors.

[Mr. King]

Well as far as the maf goes I went ahead and went with an ms3 pnp mega squirt ecu so I've deleted the maf and I have Injector Dynamics 750cc injectors just dying to be installed. I'm sorry, I suppose I should have included those details

[cbeuglas]

Disco potato will spool quick but won't make huge power top end. They are know fir there super quick spool. It will still put you well over 300 wheel hp. I don't really know the other one.

[Mr. King]

Well from what I've read about the Big28 it is basically a journal bearing 2860 crammed into the stock t25 housing. I would think this would cause it to choke out a bit up top but from what I've read it seems to flow pretty well. What I like about it is I could use all my factory water and oil lines. Plus with it being journal bearing it would be cheaper to rebuild later down the road.

[Puremunition]

a t28 will requrie a different oil drain setup. u will need a t28 drain tube n different hose to fit.

[Mr. King]

Is this the only that will need changed