Everything you wanted to know about braking upgrades

[sullen]

very true chuki. they will begin to crack normally from the drilled holes anyways. slotted is nicer to run. or you just run factory 300zx rotors, which already have an increased braking capacity than the 240sx brake setup. its easy, factory, and simple. and simplicity often works best.

[Photonic]

Ima post this link in here since this thread is already a sticky.


http://www.pirate4x4.com/tech/billavista/Brakes/

[sdhgskhwebf]

link to my old z33 brembo brake swap write-up:

http://zilvia.net/f/tech-talk/122707...on-brakes.html

[Shiri Juu Atenza]

Wow thread from the dead. LOL

[other_s14]

idk whats wrong with my breaks, i took one of the brakes apart today my back left hand side brake, to put that brake lubricant on the brake pads on my s14 i never changed out my brakes before so i just started unbolting things until i got it to come off, witch when i finally got it all back together i had to fix my ebrake and i lost a lot of my brake fluid, i replaced the brake fluid but my brakes still fell soft, need some help on fixing it, any input would be appreciated

[Shiri Juu Atenza]

Wow thread from the dead again... You need to bleed your brakes

[Infinite]

from the way he's posting about trying to pull apart and re-assemble he needs to have a shop check his work.
brakes are the single most important part of a car.

[XXXX]

thanks man this was some pretty good reading saved me posting a new thread

[PoppaDrift]

My '93 s13 coupe had Q45 rotors and calipers on the front when I bought it. Will an S13 stainless braided line conversion fit the Q45 calipers?

[whatis2nd]

Good info.