the new motor

[Infinite]

(hopefully) this will be the new setup in my coupe

sr20det

bottom end
darton sleeves, 90mm bore
90mm cp pistons, 9:1 c/r
manley rods w/arp bolts
arp head studs
heavy duty arp mainstuds
acl race bearings
*possibly* dry sump depending on finances.

top end

Cometic MLS HG
Ferrea Valve Guides
*maybe* larger valves
Tomei solid lifter conversion
brian crower springs and retainers
cams are up in the air. i really want a cam with a solid lifter lobe since they are much more aggressive
mild PnP done by me
Freddy intake manifold
q45 90mm TB

Turbo setup
ssac mani (yea yea)
tial 44mm wg w/ 1 bar spring
custom built gt3537, only one in existence :cheers:
3" downpipe
3" side exit exhaust
2.5" intercooler piping
mandatory FMIC, lol
turbonetics raptor BOV

Fuel setup
JGY top mount fuel rail
1000cc injectors
22 gallon Summit fuel cell
Aeromotive 1000 pump
Earls filter
10-an feed
6-an return
aeromotive a1000 regulator

Electronics
Power FC D-Jetro, or maybe AEM EMS if i still have my hookup

im hoping to have all of this done by july.. knock on wood

[down_shift]

$$$

[Infinite]

3500, lol

[Wedge]

I would lose about half of what is listed and buy a quality top mount.

No offense, but every setup is different. That one just looks too expensive for me.

[Echonova]

For $3500 I'd do it in a minute. G/L

[Infinite]

half of whats there? i got the manifold to make a jig. i will make my own manifold. i've been talking to geoff @ full-race and i may have a hook up, i unno yet

[Wedge]

half of whats there? i got the manifold to make a jig. i will make my own manifold. i've been talking to geoff @ full-race and i may have a hook up, i unno yet


Well I guess that's different. And 3500 is a steal for all that.

[~The_Duke~]

im hoping to have all of this done by july.. knock on wood

I will give you a happy '08 new years card with 'I told you so' written on it...

[PSINXS]

built motor ftw. you wont regret it. i know...

i wouldnt really go with an oversized valve. stock valves are fine. you can get them cryo treated to be stronger.

A solid lifter set up is going to cost much cash. (youre looking at an extra 2k+) but if you have the cash its great to be able to rev to 8k+ without breaking a rocker arm.

[Infinite]

eh fuck you. the pulling apart begins on friday... the motor and tranny come out. i may just leave the block i have now stock with just a headgasket and arp's so i can still drive it while i build a spare one

the rocker kit is only 400 bucks, and i do all of my own machine work, so thats why its so cheap. the cams are whats going to cost bank

[Decker]

nice man

[Wedge]

built motor ftw. you wont regret it. i know...

i wouldnt really go with an oversized valve. stock valves are fine. you can get them cryo treated to be stronger.

A solid lifter set up is going to cost much cash. (youre looking at an extra 2k+) but if you have the cash its great to be able to rev to 8k+ without breaking a rocker arm.

I agree. Stock valves are sodium filled. I would run them over almost any aftermarket ones, even if they are bigger.

Solid lifters are overrated IMO. They sound cool, but are a pain to setup and aren't really necessary.

[Infinite]

i can get sodium filled oversized valves from ferrea :p
i guy there owes me a favor from nopi. they were going to sponsor my civic build up now i need to talk to the guy about my 240

[Casey]

ITS STILL NOT RUNNING! ahhhH!H!hH!H!h!H!!!



bump

wub jew

[s7_]

2009 summer; still not running?

[Casey]

bahwhwahahaha

[Andy C]

hahahhahahaha

---------- Post added at 09:54 AM ---------- Previous post was at 09:53 AM ----------

damn, i thought i was slow

[Z infidel]

im hoping to have all of this done by july.. knock on wood

Of which year?

[AFSil80]

God I love threads like these.

[Slip N Slide S14]

You got all those pricey parts listed, but

BC springs and retainers?
Cometic HG
......................Those 3 parts SUCK a fat one.

And why use ACL STD bearings if your spending all this money. Mic the crank and order perfectly fitting ones where everything is even across the board and the specific clearance you want.

Also, there is no need to do a 90mm bore unless you want a 800+hp drag motor.

[ThatS13Guy]

lol

[Sir_Alexander_Slideways]

ahaha lawl

[S14Pow]

You got all those pricey parts listed, but

BC springs and retainers?
Cometic HG
......................Those 3 parts SUCK a fat one.

And why use ACL STD bearings if your spending all this money. Mic the crank and order perfectly fitting ones where everything is even across the board and the specific clearance you want.

Also, there is no need to do a 90mm bore unless you want a 800+hp drag motor.

i dunno why but i just love this guy...........no homo:gay:

[~The_Duke~]

I am calling BS right now, this thing will never run.

[Blakz33]

2009 summer; still not running?

..guess you were right lol

[SHIFT_2DRIFT]

damn man i want my sr to have all that, good luck, cant wait to see it

[zebrafantastic]

Go with tomei cams from enjuku. JGY also has a t3 topmount mani for $200 I think. Not sure of quality, but probably better than ssautocrap

[Elizabeth Reed]

pipe dreams

[J Squared]

im hoping to have all of this done by july 2026... knock on wood

:wavey:

[slammed95240sx]

hope you do it, itd be nice seeing this around cumming

[AFSil80]

damn man i want my sr to have all that, good luck, cant wait to see it


hope you do it, itd be nice seeing this around cumming

:facepalm:

[Memme]

Just thought I'd step in here...



And....



Now I'm out.

[zebrafantastic]

look at the date of the OP.

[Memme]

I think that's the punchline...

Thanks for blowing it!

lol...

[FlatWoodsMonster]

i loce the way will never came back