iluvcumming
02-03-2008, 08:06 PM
Got a new caliper, rotor, and pads for my rear passenger side wheel. The breaks work fine, but the ebrake doesn't work for shit. Kinda enguages, but not really. I've looked at both, and they're both connected the same way. The difference that I see is that when the ebrake is pulled, the one that I haven't messed with only moves about an inch, where the one I messed with moves like two inches. Which the ass end jacked up and both wheels off, I can have the ebrake pulled all the way and let go of the clutch in first w/o hitting the trottle. The right side spins while the left is stopped. If I hit the break pedal, both stop and the car dies. Telling me that the caliper works, just not with the ebrake. I took the spring off the caliper just trying to figure it out and if you turn the ebrake knob thing with a wrench it stops at the point so you can put the cable on. If you turn it back to resting position, the piston comes out. I didn't get to do a whole bunch, because it started raining shortly after, but if anybody has any clues, I'd greatly appreciate any tips.
David
David