DAMNN! i learn something new everyday Diff lock

[v-empire]

good enough for rock crawlers, good enough for jj alfano!!!

Lock/welded diff alternative.

http://images.google.com/imgres?imgurl=http://www.rccrawler.com/articles/txtdiff/55.jpg&imgrefurl=http://www.rccrawler.com/txtdiff.htm&h=316&w=320&sz=18&hl=en&start=3&um=1&tbnid=BPKSyCfrVYPlUM:&tbnh=117&tbnw=118&prev=/images%3Fq%3Dcompound%2B%2Bputty%2Bglue%26um%3D1%2 6hl%3Den%26safe%3Doff%26client%3Dfirefox-a%26rls%3Dorg.mozilla:en-US:official%26hs%3Dty1%26sa%3DN

turbo dave! go sit in the corner, watch and learn :) coz jj alfano will put this to the test.

right now, on TV its only 19.95 , for the price trippled the value, of 6 super putty, endorsed by the man himself

......Billy Mays!

http://www.atmospheric-violence.com/mays/billymays1-small.jpg

[Andy C]

jb weld a diff? lol. oook
siliconed diff? weird.

[v-empire]

no, you need to stay up till 2 am and watch the commercials on comcast 75 speed... billy mays will speak and you listen..

[JJ Alfano]

lmao

[Andy C]

no, you need to stay up till 2 am and watch the commercials on comcast 75 speed... billy mays will speak and you listen..
i saw that infomercial. you have to mix it together. its kinda cool.

[JJ Alfano]

i really do want to try that bahaha

ill bring an extra diff to cordele just in case bahah

[v-empire]

for 19.95 you get yourself a welded diff !!!

JJ alfano is the new 'myth focker'......

[JJ Alfano]

donate some of that stuff and i will try it

the worst that could happen is it goes back to open!!

genius!

[Subu]

I'd do it if my 240 wasn't my DD.

SOMEONE DO THIS!

[I RON DON KEY]

hahah

[JJ Alfano]

I'd do it if my 240 wasn't my DD.

SOMEONE DO THIS!

i am, if someone gives me a open diff to try it with, and a welded one to replace, i will be using it at cordele!!!

[Z infidel]

Can that super puty really take the torque that goes through those things? (a drift car not a rock climber)

[babowc]

Once your diff casing, spider gears and bevel gears are clean it's time to prepare your locking compound ready to lock that sucker up. We like to use JB Weld or CIG Epoxy putty as they give great, lasting results and a truly positive lock. Some people have used Araldite, Solder, Silicone, Hot Glue, Silastic and many others with great success. The silicone and Silastic options give you a limited slip effect because it gradually gets chewed up by the diff gears and provides resistance rather than prevention of the gears moving. This can be good if you run your truck on concrete or asphalt at all as a positively locked diff reduces turning radius and puts undue stress on your driveline components on surfaces with high traction.

read, dumdums.

[Z infidel]

reading that much requires an attention span longer than 18 seconds. I peak somewhere around 11.

[sofo259]

that is the stupidest thing i have ever seen or read..

its like rubbing one out, its just not as good as the real thing.. (refering to a welded diff)

[babowc]

lol
yeaaaaahhhh.
why not just stick a bunch of metal in there.
maybe it'll lock it up.
lol

[Zippy69]

that is the stupidest thing i have ever seen or read..

its like rubbing one out, its just not as good as the real thing.. (refering to a welded diff)
I don't know about you, but I know me better than anybody.
The worst that could happen? It could break? Put enough of the epoxy in there and let it harden, and I see no reason why it wouldn't last. I've used all types of epoxy, and most will last as a repair as long as you follow directions.

[JDori]

omg my roomate thinks a welded diff is dumb. and he is convinced that you can turn with a welded diff.


lol.

[shawn shawn]

Welded diff is dumb if your not drifting or drag racing.

[JDori]

true.....

but he doesnt think the car will turn at all. like not even drive able

[Z U L8R]

he said hot glue gun that shit together and call it a day or solder! *looks for my rosin core solder....

so what happens when you have hardened chunks of jb weld floating around in your fluid? the same as hardened chunks of metal floating around in your fluid?? hrmmmm

i'm gonna have a scotch tape lsd and kick ass in D1

elmers ftw!
Dave =]

[shawn shawn]

Masking tape diff = D1 win.

[Cash]

jizz diff. just save up like a months worth of ejaculatory. replace your fluid with it and give it about 2 days to cure. now that's D1!!

[Infinite]

true.....

but he doesnt think the car will turn at all. like not even drive able\
he is a tool... i drive my 240 with a welded diff on 275's and the car doesnt even make a noise... it just turns

i like my welded diff for the following reasons
Predictable.. i know what the car will do every single time i clutch kick or e-brake or whatever..
Cheap... free if you have a welder
no dealing with wearing out diff clutch packs, or changing the fluid..


oh, and that article is on a rc car incase any of you fuckers paid attention

jb weld can barely withstand the torque of tightening a bolt, much less moving a car

[Cash]

\
he is a tool... i drive my 240 with a welded diff on 275's and the car doesnt even make a noise... it just turns

i like my welded diff for the following reasons
Predictable.. i know what the car will do every single time i clutch kick or e-brake or whatever..
Cheap... free if you have a welder
no dealing with wearing out diff clutch packs, or changing the fluid..


oh, and that article is on a rc car incase any of you fuckers paid attention

jb weld can barely withstand the torque of tightening a bolt, much less moving a car

omg Will, you're such a bad ass! lol, that made my night. that and this 6-pack of natty light.

[Infinite]

yea, i know i am... before before the fucking master

[deerock]

\
he is a tool... i drive my 240 with a welded diff on 275's and the car doesnt even make a noise... it just turns

i like my welded diff for the following reasons
Predictable.. i know what the car will do every single time i clutch kick or e-brake or whatever..
Cheap... free if you have a welder
no dealing with wearing out diff clutch packs, or changing the fluid..


oh, and that article is on a rc car incase any of you fuckers paid attention

jb weld can barely withstand the torque of tightening a bolt, much less moving a car

im glad he noticed that too, i read the website name and though, what the heck are the 240 guys trying now....rc parts on there cars?? :screwy:

[JDori]

\
he is a tool... i drive my 240 with a welded diff on 275's and the car doesnt even make a noise... it just turns

i like my welded diff for the following reasons
Predictable.. i know what the car will do every single time i clutch kick or e-brake or whatever..
Cheap... free if you have a welder
no dealing with wearing out diff clutch packs, or changing the fluid..


oh, and that article is on a rc car incase any of you fuckers paid attention

jb weld can barely withstand the torque of tightening a bolt, much less moving a car

yea he is a tool. American truck guy. Thinks, by technicality, that any import with a mod done to it is a ricer.

but he is also the same guy, who wants to be diesel tech, but didnt know what a wastegate was....

[babowc]

\
he is a tool... i drive my 240 with a welded diff on 275's and the car doesnt even make a noise... it just turns

i like my welded diff for the following reasons
Predictable.. i know what the car will do every single time i clutch kick or e-brake or whatever..
Cheap... free if you have a welder
no dealing with wearing out diff clutch packs, or changing the fluid..


oh, and that article is on a rc car incase any of you fuckers paid attention

jb weld can barely withstand the torque of tightening a bolt, much less moving a car

i thought your car doesn't drive yet,
lol.

but zilvia, your friend is still a tool.
a useless one, at that.



ROFL
+1 for you catching that!!!!

[JDori]

lol yea.....

most of they guys up here are american muscle/truck tools.

but unlike down south, were smart tuners are few and far btwn, there are alot of smart guys too.....ppl who know.

[fusiongfx]

That thing in picture "5" looks like a green Twinkie.

[v-empire]

i was just waiting.....

fun spoiler.

[JJ Alfano]

lmao thats funny, based on the commercials i thought it might be possible! I mean the man glued together two pieces of metal and towed a semi!!! AMAZING!!! :yes: