Can I delete my ABS?

[Spinks]

I have a super hicas and really want to delete the ABS can I do that with the stock master cyl? How do I do this if it is possible?

[Pepperson_lead]

Master cylinder and brake lines that come off of it. I think that's it don't hold me to it

[Macolinoo]

pull the fuse

[Spinks]

pull the fuse

I want to remove the module itself.

Apparently it can't be done without getting a stock master cylinder unless I want to rig it up, which I don't want to do.

[Pepperson_lead]

I can get u a master cylinder for dumb cheap and new

[PleadingBark]

Why?

[SaUcE]

240 ABS suuuucks.

To do it right, you need a new MC for non ABS, the steel lines for the two front cals and the rear block (the 3 from the engine bay that go over the firewall).. also the rear calipers are physically different, Im not sure if you can get by using them or not. Probably just a difference in the spindle for the wheel speed sensor.


Could proably get a brand new nice MC for <$130 for a good brand (PBR, Wagner). Stay away from remans, they have a higher failure rate. People practiacally give them away when they do 300z swaps. Hell you can have my ft cals and MC if you want to drive to Tally or pay for shipping.

[super240sx71]

I have all the lines you need and the master cylinder to swap in its place. 100 buxs