Bigger turbo on the way

[Infinite]

eh so i bought an ssac manifold (shut up i'll explain)
i am making a brace using heim joints to completely remove all weight off of the manifold.. attached to this will also be the wastegate (dont want a 44mm tial bouncing down the highway)

the setup will (hopefully) be as follows

custom built garrett gt3537 (only one in existance)
ssac mani
tial 44mm wastegate w/ 1bar spring
4" downpipe transitioning to a 4" equivalent oval section exiting out of the left side skirt :D

[flip]

Looks like it will be pretty fun :-D

ETA?

[Nyteryder]

sounds interesting, do you have a built bottom or head?

[JTA021]

your gay and i will steal the setup your about to have, lol
wana sell me the turbo u got on there now?

[Wedge]

You will love the turbo and hate the manifold.

Sounds like a beast though

[Infinite]

yea i know i'll hate the manifold... its just temporary as im having one made (got the collector here already) and i may use the ssac as a jig.

eta is 2 weeks.
yea i'll sell the t28
no as it sits its stock bottom end and head.. im not going to push it to hard till i at least get headstuds... i may leave the headgasket stock as i would want that to let go before something more solid does... and eventually im picking up some 280's and springs/retainers

[PSINXS]

good luck11

[Wedge]

yea i know i'll hate the manifold... its just temporary as im having one made (got the collector here already) and i may use the ssac as a jig.

eta is 2 weeks.
yea i'll sell the t28
no as it sits its stock bottom end and head.. im not going to push it to hard till i at least get headstuds... i may leave the headgasket stock as i would want that to let go before something more solid does... and eventually im picking up some 280's and springs/retainers

sr right? there is some discussion on FA that stock head studs are fine, as well as stock head gaskets holding more than people thought.

What are you doing for a turbo to down pipe elbow connector?

[Infinite]

i'm probably just going to make another downpipe all together

[~The_Duke~]

You are going have a cool side exit like me :D

[1800DialKyle]

You are going have a cool side exit like me :D
he is going to have a cool side exit but not like you ;-)

[flip]

lol, side exit... :)

[Infinite]

my side exit will be much better.... oval piping cut into the sideskirt with a stainless steel heat shield... the falmes coming out should be purty

[flip]

I want flames on my 240 :-D

The sti shoots plenty of them but they both have to!!! 8D

[matts13]

what do you want for the t28 and when you going to have it ready to sell?

[JTA021]

no no.... im 1st in line for the t28 buddy

ill shoot ya a pm hommie

[Infinite]

im open to offers. its covered in soot from the exhaust leak.. so imma clean it pretty well first
comes with a threaded wg actuator... right now its set at 14psi and pulls like a frieght train

[Infinite]

everything is basically almost done... i need to shorten the hot side charge pipe by about an inch and get a reducer.
i have some 3.5" pipe sitting here i may try to use (why not) so i just need an elbow to fit the 44mm and the extension made