View Full Version : Will I need camber plates?
Nisxsz
11-28-2007, 09:50 PM
...after lowering my car +2in. with Eibach sportline springs?
Anyone know how much alignments cost? ...like $100-200?
Dominic49
11-28-2007, 10:14 PM
full alignment from america's best is 80 bux.... they will adjust everything cornerballence is another 90....
suprabrit
11-28-2007, 10:15 PM
You will have slightly more excessive wear on the rear tires...I don't think Sportline's lower 2" in the rear though, I want to say it's more like 1.5"...so your camber won't be that bad.
Nisxsz
11-28-2007, 10:35 PM
full alignment from america's best is 80 bux.... they will adjust everything cornerballence is another 90....
Can you explain corner balance please? sorry, noob question
You will have slightly more excessive wear on the rear tires...I don't think Sportline's lower 2" in the rear though, I want to say it's more like 1.5"...so your camber won't be that bad.
The sportlines are over 2in front and rear. Nice sig btw
suprabrit
11-29-2007, 12:06 AM
My bad, I thought it was less. And thanks. ;)
Dominic49
11-29-2007, 12:14 AM
if you have coilovers you can get your car balenced to be 50x50 side to side :)
Nisxsz
11-29-2007, 12:18 AM
if you have coilovers you can get your car balenced to be 50x50 side to side :)
damn...nah i dont have coilovers.
Right now i got Koni yellows and stock springs. I'm looking at Eibach Sportlines and unsure about the alignment thing.
Should i just get a full alignment from America's Best?
The corner balance wont make any difference since i dont have coilovers right?
It depends man. alot of places do alignments for less than that. I usually get mine done at a place in Oakwood for $49.
The Sportlines really don't drop down to two, unless I just forget how ungodly high the 240SX sits stock.
Alot of people do this (RE. 3) for rear camber http://www.240sx.org/faq/articles/camber_correction.htm
My hatch is dropped pretty low, but, I just dont mess with it, I buy cheap tires anyways for the most part.
Nisxsz
11-29-2007, 10:55 AM
So i will need a camber kit to get the camber aligned back to where it was?
Can the camber be aligned without a kit?
bump
Nisxsz
12-04-2007, 02:54 AM
I found some camber bolts on Courtesy Nissan.
Front bolts:
http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=81250
Rear bolt:
http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=55226-S14Z
Will these adjust the camber?
For the front ones, it says bolts and picture shows 2 bolts so im thinking i'll need 1 quantity. But for rear its 'bolt' i should order 2 quantity then? lol :screwy:
Nisxsz
12-06-2007, 08:43 PM
Bump for help, will those bolts work^
Stroker
03-21-2009, 03:18 PM
I know this post is old...but if you haven't already done it....Yes these will work.
Andy C
03-21-2009, 03:32 PM
im sure he figured something out by now :wink:
Powered by vBulletin® Version 4.1.12 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.