'89 240SX Hatchback shell

[BlackMage]

Year: 1989
Model: Nissan 240sx
Trim: SE
Milage: 192k
Transmission: None but has manual trans stuff
Color: White/Tan
Motor: None
$575 w/ VSLD
$375 w/ Open Diff

:Note: No Gas tank at this time.

Sellin my project because I don't have the time and money to devote to two cars and trying to build a new PC. Before my parents kicked me off their insurance and made me get my own the car was driven almost every day.

Strait frame
Quarter window and tail lights have common leak
Small dent above rear bumper and large one in the passanger quarter panal and door
DOHC P/S Lines
No A/C stuff
Rear 5-lug Hubs
180SX VLSD Rear Axle
Tien Tieirods w/ Kazama adjustible tie-rod ends
Some Enkie Wheels that came with my RX-7, the Bullitt Wheels on the back of the car are not included.
DOHC 7500RPM redline tach
Radio Harness has a Mitsubishi plug on it.
Fuel pump is hardwired with 12GA wire
Full Body harness in car still
KA24E M/T ECU
Replaced Brake Master Cylinder a little over 2years ago
Replaced Clutch Slave and Master Cylinder last year
No carpet and no interior past the b-pillars

Exterior:
http://www.andy2049.com/dustin/s13/s13a.jpg

Enkei Wheels:
http://www.andy2049.com/dustin/s13/wheel.jpg

Rear bumper dent:
http://www.andy2049.com/dustin/s13/dent.jpg

Quarter panel and door dent:
http://www.andy2049.com/dustin/s13/dent2.jpg

Engine bay:
http://www.andy2049.com/dustin/s13/enginebay.jpg

Interior
http://www.andy2049.com/dustin/s13/interior.jpg

Fuel pump hard-wired
http://www.andy2049.com/dustin/s13/hardwire.jpg

[carlova78]

is ur name andy?

[BlackMage]

No it's Dustin, but my roommates name is Andy...

[carlova78]

wow thats a deal. parting out?

[BlackMage]

Parting out, loved the car taking a huge hit money wise in selling everything. Going to start playing around with an RX-7.

[carlova78]

umm well then the tie rods. $?

[BlackMage]

Stuff being parted out is on another thread, this is just one to get rid of the rolling chassis.

[Andy C]

clean title?

[BlackMage]

As far as I'm aware of, I can get the VIN if someone wants to check via carfax.

JN1HS36P9KW002870
is the VIN

[PaintballerA91]

I need the white Hatch.
How much do you want for it?
I have been lookin for one for a really long time

And are you by any chance gonna part out that head unit?
Name a price.

[BlackMage]

Price is at the top, and no I've just been lazy and haven't pulled the head unit out of the car.

[PaintballerA91]

How much for the Hatch though?
there is not a specific price for that...

[BlackMage]

Oooh you want just the hatch, sorry my bad, I'm selling the rolling chassis as is, all parts included.

[PaintballerA91]

Dang...
I

Dang...
All i really NEED is the hatch. Im not gonna buy the whole thing.
If you ever end up selling just the hatch...
Message ME!!!

[joker7613]

Are you partin any thing out

[BlackMage]

whats for sale parts wise is on another thread unless i get really bored and desperate then whats left on the shell will be parted out.

[BlackMage]

Bump for the price drop.

[babowc]

edited for ease of viewing.
GLWS, great price.

[BlackMage]

Thx, yeah, Hell it's a good deal for some random parts and a title and vin for a "rhd" car.

[BlackMage]

Bump Again :/

[BlackMage]

Bump, if noone wants this by the 18th I'm pulling a few random things off it and scrapping it.

[Beez_S13]

well if your going to scrap it, just give it to someone. id take it. i have no money though.

actually, do you have that vlsd?

[BlackMage]

Yes I have the VSLD, I plan on pulling out of the car before scrapping it as everyone wants it and the axles. And I'm only scrapping it instead of giving it away because I need the cash and I could get a few hundred out of the scrap metal.

[carlova78]

part out?

[Beez_S13]

well, let me talk to my cousin. hes 14 and hes got plenty of time to work on a project car. so let me talk to him and if he can get it, ill point him in your direction. he wants a hatch. ill let him know

[BlackMage]

Alright, the car needs a little body work, he can choose his front end style, the body harness is all there. It's got a smidgen of rust around where the dent by the door is and also by the quarter window, but if that's taken care of now won't be an issue down the road. But it's an excellent start for a project for someone like that.

[Beez_S13]

sorry man, aaron cant get it. oh well. i might be up for the rear 5 lug or the vlsd

[wangan kid]

bump

[9195240sxduck]

PM you check your PM

[BlackMage]

Being parted out

http://240atlanta.com/forums/showthread.php?t=7977
^^ thread with whats being sold

[BlackMage]

slightly lower price and gas tank has been removed.

[Alan]

are u willing to sell the tie rod and tie rod ends? and lower control arms? if so could you pm me a price?

[Infinite]

i just need a clean title and vin tags

[BlackMage]

the title and vin plates are going wherever the metal body ends up.