Brake Conversion Question

[TejjyFerrari]

When converting brakes from stock S14 OEM calipers and rotors to Z32 calipers and rotors what is the hardware necessary for this to work?

I was told that the fronts to bolt right up to the stock assembly...could this be a noob error?:thinking:

[super240sx71]

You need conversion brake lines to go from the 240sx to the 300zx calipers. And the caliper mounts directly to where the stock caliper bracket mounts.

[garagelu]

http://importnut.net/300zxbrakeswap.htm

This website has been around for the past 5-6 years. It's is pretty accurate.

[TejjyFerrari]

Thanks man I really appreciate that!!!

[B-_-RAD]

you might look into the q45 swap. easier and cheaper

[davidk]

i fkin love my 300zx brake setup on my s13. i did the complete swap myself and used the lsd off of the same 300 i pulled the brake kit off of.
but if you decide to convert, do the entire swap and do not forget the z32 master cylinder.
you have need to look at the website garagelu posted because you have to do a little trick to get the z32 master cylinder to work on the 240sx. was a pain in my ass but i done it, no leaks.