300zx rear brake conversion question?

[Darrin s13]

could i run the rear calipers with out using the 300zx spindle set up if i used a hyrdo e-brake such as PBM or k-sport?

would it still brake properly when driving normal and would the e-brake still lock with the hydro set up?

thanks guys, Darrin.

[motormouth759]

IM pretty sure the answer is yes. Your wanting to use just the calipers and rotors without the ebrake assy and backing plate? Instead using a hydro ebrake. Im pretty sure it would work no problem.

[Darrin s13]

IM pretty sure the answer is yes. Your wanting to use just the calipers and rotors without the ebrake assy and backing plate? Instead using a hydro ebrake. Im pretty sure it would work no problem.


cause in order for me to do it the other way, id have to track down the rear spindle and e-brake set up along with the e-brake cables and i qould have to buy the megan sleeves for my coilovers to bolt up.

i just think it would be easier to run the hyrdo e-brake set up. i just wanna make damn sure before i spent a shit load on the PBM one.

[JJ Alfano]

the pbm is ran off the stock fluid brake lines, so yes, as long as the rear brakes worked normal the hydro brake would work

[youngster603]

cause in order for me to do it the other way, id have to track down the rear spindle and e-brake set up along with the e-brake cables and i qould have to buy the megan sleeves for my coilovers to bolt up.

I have all of this. I'll sell it to you cheap if you would rather do that. PM me if you're interested.

[Darrin s13]

the pbm is ran off the stock fluid brake lines, so yes, as long as the rear brakes worked normal the hydro brake would work


i just wanna make damn sure dude.