PDA

View Full Version : Distribution box/block


Jorgen
10-26-2010, 02:18 PM
Where is it?
Searched forum first, nothing.
Checked courtesyparts, but its hard to navigate, doesn't exactly say anything obvious, just 'tube assy' or 'spacer'...
KA720
10-26-2010, 02:38 PM
are you talking about the clutch damper?

or are you talking about for the brake lines? the connector that sits on the passenger side of the engine bay?
Jorgen
10-26-2010, 02:52 PM
Yes, I expect passenger side.
Talking about Brake Dampener.
Already eliminated clutch dampener.
Thanks.
super240sx71
10-26-2010, 02:53 PM
Its on the passenger framerail right before where the fire wall starts. You can see it from the engine bay.
KA720
10-26-2010, 02:53 PM
is this for an s14 or s13?
and are you saying you need a new one, or do you need to know where it is on the car?
Jorgen
10-26-2010, 02:54 PM
I imaging its what I have circled, but you go in further and you can't exactly find it...

http://240atlanta.com/forums/attachment.php?attachmentid=14092&d=1288104839
super240sx71
10-26-2010, 02:55 PM
Its on the passenger framerail right before where the fire wall starts. You can see it from the engine bay.^^^^^^^
Jorgen
10-26-2010, 02:59 PM
I'm looking for the part...

http://240atlanta.com/forums/attachment.php?attachmentid=14094&d=1288105129
Jorgen
10-26-2010, 03:00 PM
Sorry, I need a new one.
All my stopping power is going to the front brakes.
There is no balance, and I commonly use my ebrake to distribute my stopping power.
super240sx71
10-26-2010, 03:02 PM
The three underlined parts are just plastic clips that hold brake lines to the firewall.

---------- Post added at 11:02 AM ---------- Previous post was at 11:01 AM ----------

46364 is the block that splits to the rear.
Jorgen
10-26-2010, 03:06 PM
"Connecter - Brake Tube" $10.00
super240sx71
10-26-2010, 03:10 PM
I don't know what nissan says the name is that and the block in the rear is the only blocks that's in between the master cylinder and the rear brake line on the car. Unless you have abs.

---------- Post added at 11:10 AM ---------- Previous post was at 11:09 AM ----------

Oh and i have 3 or four on cars in the yard if ya want one.
Jorgen
10-26-2010, 04:00 PM
Nah, Ill buy a new one.
I hate having to do shit twice.
Thank you for your help though!
icantdrift
10-30-2010, 03:14 PM
Sorry, I need a new one.
All my stopping power is going to the front brakes.
There is no balance, and I commonly use my ebrake to distribute my stopping power.


are you positive you don't have a stuck caliper or something of that sort? that little connection block on the pass side fenderwell is just a female/female connector to attach the lines together. it doesn't serve any function as a brake balance control or anything of that sort.
Howard
10-30-2010, 03:22 PM
Unless you have a crimped or blocked brake line You have a bad master cylinder. It is a 2 stage pump. One for the front and one for the rear. It sounds like the rear is gone. If it's the original it probably needs replacing anyway.
krappy
11-03-2010, 09:07 PM
Unless you have a crimped or blocked brake line You have a bad master cylinder. It is a 2 stage pump. One for the front and one for the rear. It sounds like the rear is gone. If it's the original it probably needs replacing anyway.


this.