i am a tard

[tacos14]

ok today i fixed the vacum leak and that made my car run 1000000000 times better when i drove it it had no power....
and come to find out it is runnin on 2 cylinders.so i checked the wire and the wire worked so i went to check the spark pmug and dumb me got the socket stuck in the hole.. i went to the parts store gothe magnet thing and the reacher thing and they both dont work. dose anyone know of something that might work...


please help im a retard

thanks tony

[Broke240]

Needle nose pliers.

That is what I always use to get spark plugs out.

[tacos14]

ight thanks ill try that

[turboedsileighty]

telescoping magnet

[Nisxsz]

oh that's no biggie...get ^^^ what he said. Those extendable screwdriver looking things with magnet on the tip.

[Casey]

had this problem with andycs13's ka

i put the socket extention down there and yanked on it about 5 times
it came out after that =D

[Banzai]

tony ur a dumbass

[Wes]

Needle nose pliers, or, get the extension, put it back in there, and wiggle it til it comes free. Unless your using one of those cheap ass spark plug sockets, they're always too shallow.

[flip]

Just flip the car upside down and they'll fall right out! :)

You could always try something like tape, tape onto the end of an extension or something.

[babowc]

this happened to me alot..
spark plug sockets usually have the rubber to hold the sockets in, and sometimes they get really stiff and grab on when you're threading the plugs in.. of course, they'll get stuck.

your best bet is long needlenose pliers.
thats how i got mine out a long time ago.
or you can use chopsticks too.
if you're ninja enough, it'll work.

[v-empire]

flip the car. it will fall out.