Z1 Motorsports 1 peice Driveshaft for $268.00

[Z1motorsports]

http://www.z1motorsports.com/imageGallery/album/album567/Driveshaft_2.sized.jpg

Z1 Platinum S13,14 1-piece driveshafts are designed and built to the highest standards to provide the smoothest ride available from a 1-piece unit.
The Platinum Driveshaft also has a benefical weight loss versus the 30lb+ stock driveshaft. These shafts weigh an average of 10-14 lbs less than stock. The shafts are constructed of .065" wall tempered steel and are clear coated to protect against rust and road grime. The tubing used in these driveshafts was specifically designed by Spicer for use in driveshaft assemblies. Quality Spicer yokes, U-joints, and hardware are also used.
For more weight savings we also offer our driveshafts constructed from aluminum.
Aluminum driveshafts are custom made per order and are not in stock.
http://www.z1motorsports.com/imageGallery/album/album567/Driveshaft.sized.jpg

[maxed1]

Sweet

[Macolinoo]

not bad price... how much do ur aluminum run

[Broke240]

Any sort of warranty? Or any idea of how strong they are?

I wouldn't want to buy one and a joint break when the stock one holds 500+hp.

[Memme]

See... that's how these should be priced.

The DriveShaft Shop wants $350 for theirs...

[J Squared]

Custom lengths/yokes/joints available?

[Z1motorsports]

We will replace it if you break them cause in over 1000 drive shafts we have sold for the Z32 we have not had one returned for any sort of problem. We do offer custom lengths and barrel sizes please email me for details on a custom shaft to 240sx@z1motorsports.com
Aluminum shafts are $368.00

[Memme]

THAT'S WHAT I'M TALKING ABOUT!

incaps.

F*ck some $500 Driveshaft...

Q: Has this company ever done a performance test on one of them on a 240SX?

[MetallicDa9]

Im sure if it holds up on a z32, it will most deff hold up to a 240 of any sort.

[Mike]

I was out at z nationals a few weeks ago and you guys have a nice place! very dependable company in my opinion

[Ray@Z1]

I have this driveshaft on my car and i beat on the car all the time down dirt roads and paved empty neighborhoods. I tested the first ones for the S13 auto and 5spd with out any issues.

[Ray@Z1]

emails and aims have been answerd Bump for a great deal

[Z1motorsports]

We Now have the S13 to RB25DET shafts in stock these Drive shaft come with a lifetime warrenty.

[cjacob74]

Good ass deal. Good luck.

And yeah if you have sold 1000 to z32 people, no doubt atleast one of those guys makes over 500whp. And no complaints, meaning they probobly will hold up to your 240's power. Not to mention z32 setups would endure more stress.

[Echonova]

Awesome. After taking care of the kids Christmas presents, I know what Santa is going to buy for me.

[angelAp09]

is the group buy price, the 50 minus the 5 for the coupon code? Or is there an additional savings?

[Z1motorsports]

The price is $268 for the platinum shaft for a S13 or S14 5spd or Auto Feel free to call 770-838-7777
Also we have the RB25DET to S13 shaft in at 350.00 but if you call and say your from 240atlanta I can take an additional amount off for the christmas season.
Aluminum Shafts are and add $100 dollars

[JDori]

389 for aluminum DS..... dope... beast price

[afwfjustin]

What about s14 to rb25?

[Z1motorsports]

PM sent

[OG_Gngr_Kd]

How about s13 to LS1?

[Z1motorsports]

yes we can make any custom shaft but you will need to call or pm us and i will send you the measurements i will need from you and we will make it

[maxed1]

How about s13 to LS1?
I was thinking the same thing in aluminum

[Z1motorsports]

Well I put the driveshaft on the scale and the platinum is 17.1 lbs

[Z1motorsports]

We will make any custom size driveshaft for your needs for just 280 USD plus shipping

[DJMerck]

Dang,,,, I want one

[homeslicej2]

how much do the aluminum ones weigh? S13 5-speed with J30 VLSD (so, same length as ABS S13 driveshaft)

[Buccaneer_9]

How do they compare to these?
http://shaftmasters.com/nissan-240sx-drivesha240.html