PDA

View Full Version : *ISIS RS3360 Turbo - Nissan SR20DET


Enjuku Racing
09-28-2009, 07:52 PM
*ISIS RS3360 Turbo Upgrade for the Nissan SR20DET.

http://www.enjukuracing.com/images/kkr330f.jpg (http://www.enjukuracing.com/isis-rs3360-turbo-nissan-sr20det-p-9084.html)
$499
http://www.enjukuracing.com/isis-rs3360-turbo-nissan-sr20det-p-9084.html

ISIS Has just released their turbo upgrade option for the SR20DET. This is a great inexpensive replacement turbo for your Stock T25 or T28.

Big Performance in a compact package

This compact turbocharger offers much more top-end power than the the stock Turbos, thanks to a large 0.86 A/R exhaust housing. It offers good response on 1.8 litre to 2.2-litre four-cylinder engines.

Turbo Specifications:
Compressor side inlet 60mm, outlet 50mm, 56-trim compressor; inducer 45mm, exducer 60mm
Exhaust side 0.86 A/R turbine housing, turbine wheel outlet 46mm, outer diameter 53mm

Results:
On the SR20DET This turbo achieved ~280hp at 14psi. This turbo is rated up to ~330hp. (Very Similar to an S15 turbo)



Pre-Order sale this week only!
$450 if you buy now before the next shipment comes in. Call or shoot me an email to recieve the special pricing.




Thanks,
BG
BG@enjukuracing.com
352-241-8399
Cameron.
09-28-2009, 07:53 PM
ebay quality?
Enjuku Racing
09-29-2009, 02:03 PM
ebay quality?

If ISIS is ebay quality then I guess I should start buying from ebay. The turbo is on our KA-T car and its runs amazing. Along with the Isis Z-maf and intercooler kit and BOV and radiator. :yes:. Do you plan on using this turbo for your rb25 or something? ;) lol.




-BG
Cameron.
09-30-2009, 08:27 PM
well i mean does ISIS make it in house, where is it made who makes it? thats more of the question i was asking...
Enjuku Racing
09-30-2009, 08:29 PM
well i mean does ISIS make it in house, where is it made who makes it? thats more of the question i was asking...

"Ebay quality?" doesn't insinuate that type of question at all. But yes, their turbos are made in their factory, and we personally tested them before putting them on the market, just like all of the other ISIS products.
babowc
09-30-2009, 08:32 PM
What's the warranty on these?
Cash
09-30-2009, 08:34 PM
I've been completely satisfied with every ISIS product I've gotten from BG so far. :)

I would buy this before I would buy any "eBay turbo."
Cloudy-G
09-30-2009, 09:25 PM
what's the warranty on these?

x2
Enjuku Racing
09-30-2009, 09:38 PM
What's the warranty on these?

1 year manufacturer defective warranty. If you receive a defective turbo, they'll gladly replace it. If you destroy the turbo I don't see that happening though. But even then we here at enjuku are willing to help, and we back ISIS 100%. If you're unsatisfied with any ISIS product give us a call and let us know, we'll work something out with you. Basically you send it to us, we inspect it, if we can't determine the problem then we send it to them and go from there. But I don't think it'll ever have to go that far :).



ALL of ISIS stuff is warrantied this way. Feel free to ask anymore questions :D

---------- Post added at 05:38 PM ---------- Previous post was at 05:37 PM ----------


I've been completely satisfied with every ISIS product I've gotten from BG so far. :)

I would buy this before I would buy any "eBay turbo."

You're too sweet Mr. Cash :yes:
Enjuku Racing
10-07-2009, 02:46 PM
Wow these move fast, we only have 2 more left again before they go on back order once more for probably about 2 weeks!
J Squared
10-07-2009, 02:57 PM
Hypothetically, what would happen if the compressor wheel on one of these went through my engine after a few hundred miles of stock boost?
Enjuku Racing
10-07-2009, 03:55 PM
Hypothetically, what would happen if the compressor wheel on one of these went through my engine after a few hundred miles of stock boost?

Thats pretty impossible to say the least. With any turbo.
J Squared
10-07-2009, 03:56 PM
hmmm, ok
Enjuku Racing
10-07-2009, 03:59 PM
Lol. Stop fighting it, you know you wanna try it ;).





-BG
Enjuku Racing
10-16-2009, 03:06 PM
3 left in stock until they're on back order again :)
JJ Alfano
10-16-2009, 03:45 PM
hmm, interesting
Enjuku Racing
10-23-2009, 04:12 PM
hmm, interesting

Very interesting!
shawn shawn
10-23-2009, 04:24 PM
Enjuku <3

---------- Post added at 12:24 PM ---------- Previous post was at 12:24 PM ----------

More Importantly BG <3
Enjuku Racing
10-23-2009, 08:22 PM
Dang, I like that. <3
vqdreaming
10-23-2009, 08:52 PM
agreed


Enjuku <3

---------- Post added at 12:24 PM ---------- Previous post was at 12:24 PM ----------

More Importantly BG <3
Enjuku Racing
10-26-2009, 01:47 PM
agreed

Haha, you guys are too sweet.
Enjuku Racing
10-30-2009, 09:37 PM
Turboooooo
Enjuku Racing
11-09-2009, 03:29 PM
We're back from SEMA, still have a few in stock!
PleadingBark
02-04-2010, 04:52 PM
Got mine in, made 250whp @12psi tuned very very conservatively. Going to get tuned in the next day or so hopefully at 14psi. Hope to see around 270-275whp.
C.Ward
02-04-2010, 05:15 PM
I have two of these on my 2j! There great!! Hey bg ! hook me up on a radiator.
Enjuku Racing
02-05-2010, 02:07 PM
Got mine in, made 250whp @12psi tuned very very conservatively. Going to get tuned in the next day or so hopefully at 14psi. Hope to see around 270-275whp.
Nice! Keep us posted :D

I have two of these on my 2j! There great!! Hey bg ! hook me up on a radiator.
You've got my number lol
vqdreaming
02-05-2010, 02:23 PM
on the ca or sr?


Got mine in, made 250whp @12psi tuned very very conservatively. Going to get tuned in the next day or so hopefully at 14psi. Hope to see around 270-275whp.
240JESSx
02-05-2010, 02:46 PM
so my buddy has this and he says it can destroy the world lol
PleadingBark
02-06-2010, 05:57 PM
on the ca or sr?

Sr.

270whp and 272tq. BAM!

http://i296.photobucket.com/albums/mm162/kikcaffine/CMELDE240SXHP.jpg
PLAY
02-06-2010, 06:13 PM
that looks like an ms paint dyno. lol
Z U L8R
02-06-2010, 06:29 PM
^^ your boost controller made all the difference

you can shift at 6500rpm, cause that little housing's killing all the torque up top. Definately not too shabby tho for tuning it @ 12.0-11.7 a/f ratio.

Dave
PSINXS
02-06-2010, 08:51 PM
its either this or an s15 turbo. and i think the isis is good.
green91
02-07-2010, 01:02 AM
Oil Journal or BB? Looks like a nice alternative to the s15 turbo.
PleadingBark
02-07-2010, 01:06 AM
Oil Journal. Its very comparable to the t28 thats non BB. Plus it has a 1 year warranty. Can't beat that!
Z U L8R
02-07-2010, 02:28 AM
that was my first experience tuning an sr car with that turbo.

it's not the best thing since sliced bread it but i wasn't disappointed either. it did its job.

it's fair priced, brand new, and has a 1 year warranty......a used t28 may only have one of those attributes..

so all in all it's not bad. the spool's kinda inbetween a t28 and a 28/71, but at least you know what you're getting.

Dave
Enjuku Racing
02-08-2010, 03:57 PM
^^ your boost controller made all the difference

you can shift at 6500rpm, cause that little housing's killing all the torque up top. Definately not too shabby tho for tuning it @ 12.0-11.7 a/f ratio.

Dave

The rs3360 has a pretty decent hotside, I'd say throw some 264/264 brian crower cams on that motor and you'll see power all the way to redline!
PleadingBark
02-08-2010, 04:02 PM
The rs3360 has a pretty decent hotside, I'd say throw some 264/264 brian crower cams on that motor and you'll see power all the way to redline!


You send em my way, an Ill put em on and we can see.
Enjuku Racing
02-08-2010, 05:07 PM
Tried calling you Chris. I'll give you a hook up on some cams, we want to see how the turbo responds with cams!!!
Z U L8R
02-09-2010, 12:21 AM
sounds like a plan :) , helping the motor breath up top aka putting in cams will definately help with the power near redline, and i agree on 264's over 272's or other craziness.

Dave
Enjuku Racing
02-09-2010, 02:37 PM
Indeed. 264s are where its at for this kinda turbo set up.