Gettin the sr, but one last question.

[Andy C]

I have heard nothing but good things from jarco, and i'm pretty sure i'm goin to get my motorset from them no matter what you guys say, but i'd like a little more feedback before i go buy it on thursday. I know I already had a thread like this, but you know how it is when your about to drop a chunk of money...

So jarco is only selling complete motorsets now because of regulations, but they still testdrive their cars before they remove everything, so it will be a complete running motorset with everything I need.

[turbology]

Other: Spend another $60,000 and get yourself a 2009 US Skyline

seriously, are you going to put the engine in yourself.
Do you have any mechanical background ?
Any warranty on the SR ?

[Z infidel]

Spend the same as above and create an RB26DETT AWD 240 like they did in Modified a few months back.

[carlova78]

Other: Spend another $60,000 and get yourself a 2009 US Skyline

seriously, are you going to put the engine in yourself.
Do you have any mechanical background ?
Any warranty on the SR ?

c'om man. hes serious. this young man wants that sr hes been dreaming since he was a little boy. btw u poser sig. wats his face has that sig.

[Andy C]

Other: Spend another $60,000 and get yourself a 2009 US Skyline

seriously, are you going to put the engine in yourself.
Do you have any mechanical background ?
Any warranty on the SR ?
I'd rather put 60,000 into an s13 than an ugly skyline

and with the help of some ppl i am goin to do it myself, even though i have not mechanical background. seriously though that offended me. Why would you even ask me that? I do have a mechanical background, and i would like to build it even more.

Spend the same as above and create an RB26DETT AWD 240 like they did in Modified a few months back.
Ok i'm on it

c'om man. hes serious. this young man wants that sr hes been dreaming since he was a little boy. btw u poser sig. wats his face has that sig.
Thank you

[BenefitX]

spend 2750 if you have it to spend , dont take chances

[turbology]

seriously though that offended me. Why would you even ask me that? I do have a mechanical background, and i would like to build it even more.

Not try to offend you.
Putting a different engine is a huge job.
I don't have a mechanical background, but I did tranny work, engine work all by myself. Yes, you can probably do it.
I just want to make sure you know what you are getting into.
RB26DETT in S14 ? That's even worst. Good luck

[MOOREOFSTEPHEN]

Yeah, don't take a chance!!! Trust me! I know people who did... worst mistake. If you need help installing it or have questions give killswitch shop a call buddy!

Good luck

--Stephen

[carlova78]

dude hes asking if he should buy from there or not.

[Andy C]

Not try to offend you.
Putting a different engine is a huge job.
I don't have a mechanical background, but I did tranny work, engine work all by myself. Yes, you can probably do it.
I just want to make sure you know what you are getting into.
RB26DETT in S14 ? That's even worst. Good luck

Its not rocket science.

The worst thing that could possibly happen is I decide its too much work for me and i have to pay someone else to do it which I would have had to do in the first place if i didn't even try. but thats not goin to happen, so im not worried about it.

have i met you turbology? just wondering.

[turbology]

maybe. Are you the one who have always flat front right tires ?
And recently have new front bumper ?

[Andy C]

nope. Not me

[Cash]

Does jarco already have the motor set or would you be going to request them import one for you? It's always better if you can go look it at, start it up and listen to it, etc. Also you can inspect and make sure that not only are you getting a complete motor set, but also that everything is in good condition, including radiator, intercooler, etc. Even if it's stuff you plan to replace, if the stuff is in good shape it says more for the shape of the motor.

I say if you can go inspect the motor set at jarco, go with jarco. Don't take any chances. Also, if possible you should take someone who is very knowledgeable about sr's with you because they'll know more of what to be looking for. Offer to buy them lunch or whatever it takes to get them to come help you out.

[Andy C]

Lunch is not in my budget. jk.

They already have the sr in stock. i talked to him today he said it is a complete motorset and it was driven in japan just like the way they did half cuts. I need to find out if they have the vid.

Anyone want to come wit me to check it out thursday afternoon?

[seksehowy]

gl, i recently got my sr too back in june. great fun. :] u'll enjoy it buddy.

[Andy C]

where did u get urs from?

[~The_Duke~]

I say go with the one that you know works...

[RPS13]

http://www.heavythrottle.com/

everything you need plus warranty. you can also get everything else you need for install (i.e. heater hoses, aiv plug, etc) click install kits

who's gonna do your wiring?
http://www.wiringspecialties.com/

[Casey]

in all honesty just spend more cash and go jarco... its worth it

[RPS13]

oh yea? is that where you got yours from?
heavy throttle ships to your door for about 50 or so bux more than jarco and have a better warranty

[NISMODUDE1988]

OTHER: SPEND 1GRAND ON A RB20 AND TAKE THE 1750 FOR UPGRADES

[Casey]

no i dont have an sr lol

[Rbsil80]

OTHER: SPEND 1GRAND ON A RB20 AND TAKE THE 1750 FOR UPGRADES
u mean repairs right not upgrades(j/k). stick with the sr and use jarco.

[hellfire]

I like J-Hot personally. JARCO is always was overpriced compared to them. SR's from J-Hot are $1600. I have gotten plenty of them now, all good working motors. Some even came with suprises.

Also, RPS13 why would you pay $12+shipping for a AIV plug, when you can just put a nickle in there, and tighten the stock plug back down on it. Perfect fit, and about $11.95 cheaper.

And if you need any help with wiring or install whatever, just give me a call. :)

Tyler

[carlova78]

i know nad auto dynos the motor before you purchase too

[v-empire]

awesome, andy!!!!!
i m excited too!

[Echonova]

JARCO may be a little more than other places, but I have NEVER been disappointed in anything I have bought there and I have bought a lot.

[omgtofu]

other: jazzproparts.com

SR20DET S13 Black Top
Our Price: $2,095.00


SR20DET S13 RED TOP
Our Price: $1,895.00

SR20DET S14 Black Top
Our Price: $2,495.00

[v-empire]

have you bought from jazzproparts before??

i ve personally bought about 20 motorsets from him.

just wondering......

i would never recomend something i ve never tried.

[omgtofu]

well, you could always get someone else to spend the cash and evaluate, so you dont have to! lol jk. no ive not bought from jazzpro, but have heard many good things about them in the top magazines.

[Zane98S14]

I like J-Hot personally. JARCO is always was overpriced compared to them. SR's from J-Hot are $1600. I have gotten plenty of them now, all good working motors. Some even came with suprises.

Also, RPS13 why would you pay $12+shipping for a AIV plug, when you can just put a nickle in there, and tighten the stock plug back down on it. Perfect fit, and about $11.95 cheaper.

And if you need any help with wiring or install whatever, just give me a call. :)

Tyler

He's so good at this game he answers my questions before i even ask them. Was just about to question Jhot...i'm on a budget so if its hard to justify paying 2750 if i can get one for 1600 with a good rep. I know i know thats a horrid justification but part of me is willing to risk the chance to save a grand. Specially if someone with loads more of experience with this than i 'recommends' them. Thanks Tyler, you may get a call if i fail at my installation.

[Andy C]

hmmmm. idk. what to do? what to do?

[v-empire]

i ll go with what you feel is best and trust.

[flip]

maybe. Are you the one who have always flat front right tires ?
And recently have new front bumper ?

That would be Kyle (Slowrolla97) :).


I like J-Hot personally. JARCO is always was overpriced compared to them. SR's from J-Hot are $1600. I have gotten plenty of them now, all good working motors. Some even came with suprises.

Also, RPS13 why would you pay $12+shipping for a AIV plug, when you can just put a nickle in there, and tighten the stock plug back down on it. Perfect fit, and about $11.95 cheaper.

And if you need any help with wiring or install whatever, just give me a call. :)

Tyler

Both J-Hot and Jarco are good. Ones a little more expensive... Go either way. You will be happy.

[hellfire]

He's so good at this game he answers my questions before i even ask them. Was just about to question Jhot...i'm on a budget so if its hard to justify paying 2750 if i can get one for 1600 with a good rep. I know i know thats a horrid justification but part of me is willing to risk the chance to save a grand. Specially if someone with loads more of experience with this than i 'recommends' them. Thanks Tyler, you may get a call if i fail at my installation.

Let me know. :)

Tyler

[TheBigT]

good luck andy!

i say, call tyler regardless

spend what u need to spend. take no chances.

[Andy C]

I have a plan. I'll let you guys know as soon as I get it.

[I RON DON KEY]

I believe Heavythrottle.com is also a very good company to turn too. Good luck in whatever you do.

[Andy C]

i already decided, paid and am waiting. I'll let you guys know when i get it how it goes. I'm sure it will be great.