ok. need to get rid of alot of stuff.

[v-empire]

some will go on ebay and some will be posted else where. but you guys get dibs. i give it one week.
i ll do as cheap as i can.

i ll post all nissan here
no pics. ceom down, its close enough. cumming, norcross or marietta. depending on item size and its current location.


s14 zenki. super clean fenders. black- 200 a pair.

stock sr20det flywheel - 100

darton sleeves 86mm brand *new - 280 (this is a steal)

*used crower rods sr20det (not BC) excellent condition - 400 complete

tomei poncams *used excellent duration 264, 11.5 lift - 300 a pair

*new hks exhaust cam sr20det 256 s13 - 175 single

6 point JDM roll cage clean safety21 chromoly - $400 pick up (cheap)

rps13 K's front calipers&brembo cross/slot rtrs. no pads. l'ger than stock- 200
used greddy oil catch can - 50

JIC magic*new S13 tie rods inner (uses stock or aftermkt ends) - 170 (cheap)

JIC magic strut tower bar rear S13 & S14 JDM solid - $ 180 each (pimpness, pick up)


megan rear toe control arm link- 110

competition clutch twin plate new in box- 1100


s13 sr20det ported and polished built head crower(not BC) springs/ret.-400

Sard Injectors (no cheapos, only the best) 740cc - 330

stock injectors sr20det 370cc (for KA upgrade also) - 25 each


BODY KITS FENDERS AIT (new)

B-magic s13 SILVIA 20MM wide body front- 250 pick up

Silvia s13 front bumper B-magic - 220 pick up

b-magic rear bumper s13 hatch - 220 pick up

Sparco sprint seats blue, used clean. - 320 a pair.


i have more.... i need to make a list.

[Z infidel]

Wow I really need payday to get here so I can help you out with some of that.

[Infinite]

hook me up on the sleeves

[v-empire]

i mihgt put a few block together, if someone wants. send to machine shops, new head gasket, rings, bearing.....etc, and put together fresh motors. SR only.

[v-empire]

hook me up on the sleeves

they are yours, come pay for it and pick them up

[badass240]

bump for some nice stuff

[ThatS13Guy]

oohh good luck with it man

[Hammerhead-i Eaglethrust]

i mihgt put a few block together, if someone wants. send to machine shops, new head gasket, rings, bearing.....etc, and put together fresh motors. SR only.


I'd be curious as to how much that would be... and how much power it would be good for.

[v-empire]

well, you tell me how much power you want to push and i ll put it together. simple. either ways you get a fresh motors.
just the block and head. you will have to purchase other accessories like manifolds, injectors, etc.....

normally i charge $1200 for labor for just to build it, stock or high hp. its the same to me.

but this time you get a complete fresh block for that price.

$1200 and up depending on hp.
comfortable building up to 750 hp SR20det. but that is money.

[DAsquintz]

awww man; i need the winning lottery numbers

[SeanDavy]

I'll take the fenders depending on condition...I live just outside of Cumming, can I come take a look???? or get a picture?

[flip]

*waits for coupe to sell*

[carlova78]

yo wat does the b magic rear bumper look like? ready to install or need holes?

[Rbsil80]

do you have any oil pumps?

[v-empire]

sorry, no oil pumps.
i have to order them if needed.

[Rbsil80]

How much can you get one for?

[matts13]

any aftermarket 180sx front ends?

[RPS13]

hey,
are those injectors new or used? top or side mount? if they sell before i get money how much would they cost or is this what you could get them to me for whenever?

[carlova78]

so wat does the rear bumper look like? y do u have a black man as ur avatar?

[v-empire]

I'll take the fenders depending on condition...I live just outside of Cumming, can I come take a look???? or get a picture?

i thought you wanted S14's. i dont have those in stock. i can order but the prices you offered is almost the price of shipping a set out.



yo wat does the b magic rear bumper look like? ready to install or need holes?

checkout AITracing.com


do you have any oil pumps?


How much can you get one for?

oil pumps run around 250 i believe. but its essential for a build.


any aftermarket 180sx front ends?

aftermarket 180sx?? are you messing around with me again, Matt?
spanky, spanky!


hey,
are those injectors new or used? top or side mount? if they sell before i get money how much would they cost or is this what you could get them to me for whenever?

side mount? you mean feed? yes.
well, the sards are not cheap whatsoever. if you need injectors, i can get them for odered pretty conveniently.


so wat does the rear bumper look like? y do u have a black man as ur avatar?

the black man is stalking you.

[Barnacles240]

holy damn, i NEED that roll cage, and rear traction rods, and jic tie rods

[SeanDavy]

s14 zenki. super clean fenders. black- 200 a pair

These arent the fenders you are talking about??? They are what I need...95-96 240....please let me know I need em pretty badly

[v-empire]

oh yes..s14 fenders i sold them, but i think i may one more, now that you reminded me.

let me check. lol

i have had alot of s14's, i forgotten about the black ones too. yes, i know where they are at. let me go look and see.

pm me your number please. thanks.


i have the suspension parts also, ASAP!!!!!! archghghhghgh..........pheewww.

[Infinite]

hey dave. will those front fenders clear 18x10 work equips that are -6 offset? if not can you get 30mm?

[v-empire]

yes. i run those too.
works fine.

[Infinite]

so what would joo do cash picked up?
for yours truly? lol

[v-empire]

sold them two days ago.

[Infinite]

fooker. get me another pair, 20-30mm

[v-empire]

well, i m still waiting for you to come pick up and pay for the sleeves you wanted, and the other stuff you asked for that i cant remember....lol

i can order them when ever you want them, you already know that.
but i need you to be serious about it............. so when ever you are ready, give me a hala hala hala hala hala hala hala hala hala.

[wantboost]

what model is the cage for?? and if for an s13 coupe do you have to remove your interior like the blue cusco one. (i know this is sold by cusco as well)

[v-empire]

the cage was sold already. someone on here bought it.

[badass240]

u got some pretty nice stuff there, good luck bro

[dangermouse73]

Whatcha got left now?

[v-empire]

silvia k brakes, new clutch 4 puck flywheel and pressure plate, block sleeves, bunch of misc items. you should stop by when you have time. i ll dig something up.