will z32 brakes work with s14 abs?

[slideways]

just wondering if there is a seprate convetion line or certin caliper i would have to get?

bump

[iluvcumming]

I'm wondering the same thing about my s13.... :-/ I sure hope so!

[Infinite]

abs has nothing to do with the calipers... its a separate unit inside the engine bay
you will need different brake lines

[iluvcumming]

got the lines and ebrake cable. :) It's funny that slideways posted this. I just came in the brakes area to post that same thing.

[slideways]

^ well thats convenient as hell lol
anyway ive done the z32 swap before on a non abs s14 but when i look in the wheel well there is the main brake line and then there is another brake line

[Casey]

it will work.

take a picture of this "extra" brake line.

you basically just need to replace the line from the chassis of the car to the caliper with either oem z32 rubber lines or stainless projectnissan z32 conversion lines.

[slideways]

http://i297.photobucket.com/albums/mm222/recklessatl/DSCN2909.jpg

i havent looked at the z32 calipers in a while but i dont recall a place for that^ to connect

[motormouth759]

everything works right. Abs works off a wheel on the hub, not the brakes. As long as you dont change the hubs everything will work right.

[slideways]

thanks:goodjob: thats what i needed to know

[iluvcumming]

shitty ass! I'm wanting to do a 5 lug conversion on my superhicas with ABS. That's gonna be a problem huh? :(

[Wes]

shitty ass! I'm wanting to do a 5 lug conversion on my superhicas with ABS. That's gonna be a problem huh? :(

Just get ABS S14 hubs.
Should work.

[iluvcumming]

that blows. I have a non abs s14 that I was robbin the hubs from. :(

[Cool Cat Racing]

The ABS ring will come off the hub and you can install it on the new one. There is only one brake line either way, the other line is the wiring for the ABS sensor. The Z32's had ABS so you don't have to worry about anything else. Just bolt them up and use some SPL lines and you'll be fine.