TOB Removal

[BigJack]

I have the TOB and the thing it's attached to out of the tranny along with the fork. Now how do I get the TOB off the thing it's attached to and which way do I push (when looking at it do I pull it or push it)?

[I RON DON KEY]

you are a tranny wut?

[BigJack]

TOB=Throw Out Bearing

[SCato]

did you order a clutch kit?

mine came with the whole thing all i had to do was remove the old one from the fork and install the new one

[BigJack]

did you order a clutch kit?

mine came with the whole thing all i had to do was remove the old one from the fork and install the new one
Yep, UPS says it will be in on friday. And if that's the case and it comes with the whole thing then I just have to put the spring back on, put the fork in, snap the spring onto the fork, and snap the fork back into the pivot. Ready to go on! Everything is greased up and ready to go.

Edit: I just found a site where a guy got an Exedy OEM replacement kit and he said you need to take the bearing off the main thing and then use a wheel puller (I guess hub puller) to put it back on. You can probably use the wheel puller in reverse to take it off. If this is the case I'll find one and just do it in the store so I don't have to rent it, take me a few seconds.

[Wes]

You can do it with a hammer and a block of wood, and a big socket.

Take the big socket to knock the big thing out of the TOB, then when you put the new one on, just tap with hammer and block of wood.

[omgwtfbbq]

Titties or butts?

Edit: Or is it Titties or Beer? Why not both?

[Wes]

I like to ITB then ITT's.