PDA

View Full Version : s13 Tie rod end problems


Devious Furlong
07-11-2008, 07:08 PM
Well I got the bolt and the metal clip off of the nut. And I unscrewed the nut. But my problem is that the nut will not go back on the tie rod bolt. It looks like the bolt get's bigger at the end. But I had no problem getting it off. Any help pls?
Neejay
07-11-2008, 07:11 PM
huh?

Are any of the threads stripped? That's the only thing I could think of. Did you just remove/re-install, or is the hardware new/replaced?
DjTechNick
07-11-2008, 07:14 PM
the answer is beer. don't think about it again till you have had at least 3 beers. I'm sure it will help.
v-empire
07-11-2008, 07:21 PM
get a file and file it down a little.

its from someone banging it with a hammer..
Devious Furlong
07-11-2008, 07:32 PM
get a file and file it down a little.

its from someone banging it with a hammer..


I'll try that. thanks