Motor Build..

[hellfire]

Just a step by step of her motor going together.

Parts:

Bottom End:
Eagle Rods
CP Pistons
Overbored Block with 86.5mm Darton 35 Series Sleeves
ARP Headstuds
ARP Main Studs
ACL Race Main Bearings
ACL Race Rod Bearings
Balanced Rotating Assembly
Cometic Head Gasket

Head:
Fully Ported and Polished
5 Angle Valve Job
Ferrea Springs
Ferrea Retainers
Ferrea Seats
Jun 290 Cams
Tomei Rocker Arm Stoppers
Greddy Intake Manifold

Misc:
Lightweight Unorthodox Pulley Kit
Lightweight Unorthodox Crank Pulley
She wanted to paint the block..

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/PaintingBlock023.jpg

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/PaintingBlock022.jpg
So we taped it off.

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/PaintingBlock024.jpg

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/PaintingBlock028.jpg
Painted..

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/PaintingBlock014.jpg
Parts Ready

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/EngineBuild016.jpg
Main Bearings in.

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/EngineBuild020.jpg
Crank, ARP Main Studs, and Cradle on.

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/EngineBuild021.jpg
Uno.

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/EngineBuild022.jpg
Dos..

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/EngineBuild023.jpg

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild001-1.jpg
pistons in.

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild003.jpg
Oil Pump, Pickup and Splash Guard on.

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild005.jpg
Water Pump, Crank and Water pump pulley.

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild006.jpg
Carina's Nephew getting in on the action.

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild012.jpg
Oil pans on.

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild014.jpg
HG Ready. LoL.. THAT IS NOT ME!

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild018.jpg
Head on.

Thats all for today, I can't find my damn deep 12point 13mm socket, so I can't torque the Head Studs down.. Gay. I'll have to buy one.

Also, the head is going to be painted as well. She wanted to take it back off to paint it, and I just wanted to get shit done. So it will be painted gold as well, I think, soon.

Tyler

[Carina240sx]

Hell yeah! Im excited!

Carina

[hellfire]

Verry exxccciiiiiiite!


Tyler

[Carina240sx]

Shut up!

Carina

[Casey]

lmao
nice pics
its gonna be sweet when its done =D

[Carina240sx]

Thanks! Hopefully its going in soon!

Carina

[Dan@CompetitionClutch]

GOLLLDDDDDDDDDDDD!!! lol

[hellfire]

Thanks! Hopefully its going in soon!

Carina

Bah, you fibber. Unless you are pulling in some extra cash I don't know about. Becuase where is your Mani and Turbo. :thinking: :taunt:
Tyler

[Carina240sx]

Bah, you fibber. Unless you are pulling in some extra cash I don't know about. Becuase where is your Mani and Turbo. :thinking: :taunt:
Tyler

Well when we get done selling the black car or get the money for the real estate thing...thats where the money for my turbo and mani is!

:goodjob:

Carina

[Dan@CompetitionClutch]

lols at the both of you!

[Casey]

hahaa same
lol @ this thread

[flip]

I have to say I'm not usually a big fan of gold but I do wana see this when its in... It could have potential.

On a side note... I want a motor to play with :). I'm getting bored with nothing to take appart...

[carlova78]

its ganna be fast.. whos the fat guy

[Broke240]

Looks great.

What pistons and rods did you guys go with?

[sofo259]

CP pistons i think, maybe eagle rods..
i saw a pic of the stuff somewhere

[hellfire]

Yep. 86.5 CP Pistons, Eagle rods.

I guess I could say all the stuff in the first post. I'll edit.

Tyler

[Broke240]

Have you decided on what turbo to go with?

[sofo259]

estimated amount of hp ??

[sofo259]

Have you decided on what turbo to go with?

i think its getting a gt35..

[hellfire]

Ok, the original plan was a GT35. BUT I think for right now, to get used to the car and everything, we are going with a GT28. If that isn't enough power, then we can step up later. Plus that lets us finish the build a lot quicker becuase we don't have to buy a manifold and all that.

Not sure on Estimated HP. We'll see when we get on the dyno. :)

Tyler

[bleach8484]

Dont have to buy a new manifold for a GT2871r either, and they are about the same price.

I dunno what type of managment you have or what size injectors. But it should be good for around 360hp. I would be content :)

[Broke240]

GT28s on similar setups as his have pushed out over 400 to the wheels. From the looks of it the car is not going to be made for dragging so 400 should be plenty.

[hellfire]

we are going with a GT28.

Tyler


Dont have to buy a new manifold for a GT2871r either, and they are about the same price.


Yeah, we are probably going with a 2871r .64 and shooting for 375ish. Probably also going to get some smaller cams for the time being. JW S3's seem to work great.

Tyler

[Casey]

smaller cams? :(
whhyyyyzzz?
why not bigger cams ...
high rpm power ftw =D

edit
course then u need springs for a huge lift...

[hellfire]

We have springs, but running the JUN 290's we have, and a GT2871 would not go together. That is a high RPM based power cam, and the GT28 is a low RPM, response oriented turbo. They don't mix.

Tyler

[hellfire]

*Update*

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild002.jpg
Cams, Cam Caps, and Rocker arm stoppers being put on.

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild003-1.jpg
All on.

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild004.jpg
Done. Minus a few things, but we were tired. Just set the valve cover on there to take some pics.

So.. Which looks better? Blue or Silver?

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild005-1.jpg

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild010.jpg

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild008.jpg

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild007.jpg

http://i7.photobucket.com/albums/y251/MyCockerIs4U2NV/MotorBuild009.jpg

Tyler

[Casey]

hmmmm silver i think
why does a dohc have rocker arms ... ick

[hellfire]

They aren't rocker arms like the SOHC's. But same concept.

Tyler

[Casey]

hmm interesting concept
less rotating mass with a rockerarm and one cam lobe... interesting...
*sees differences in ka24de and sr20det .. aside from the obvious turbo and compression

[flip]

Ok. I like the blue and gold... Can't say I'm not biased tho :).

[babowc]

i like silver..
lol
maybe gold vc too? :)

[hellfire]

I don't think she wants a gold VC too. I think its between Silver and Gloss Black.

Tyler

[Infinite]

black chrome would look good

[hellfire]

Hmm.. Black Chrome..

http://www.yournutz.com/store/images/8blackchrome.jpg

Looks good! LoL..

Tyler

[Infinite]

ech, thats not what im taling about
this color (my turbo)
http://www.we-todd-did-racing.com/thumbs/large/283912_e30b3/V4SQJ8NPHLLWCYI.JPG

[hellfire]

Ahh.. Would look good. Her engine bay is being painted Flat Grey when the motor comes out. So we'll see.

Tyler

[Infinite]

well my buddy mixed the powder for that shade, since i requested it. the garrett engineer, he does valve covers for 80 bucks for me so lemme know/

[hellfire]

Will do.

Tyler

[Infinite]

see, im good for alot of things,
:p

[hellfire]

Most definetly. I'll have to become a closer friend so I can use you for your resources. Haha..

Tyler

[Infinite]

as long as you say my name when its all over, :lmfao: