View Full Version : Tires Rubbing...
projectpanda13
04-29-2008, 01:20 AM
Is anyone also running 300zx wheels with 225/50/16 up front and rubbing on the fender liner? Should I have gotten a smaller aspect ratio? Thanks.
JTA021
04-29-2008, 01:21 AM
take it out. lol
~The_Duke~
04-29-2008, 01:21 AM
why are you running a 50 profile tire on it...
babowc
04-29-2008, 01:25 AM
Z32 wheels are 16"
50 profile sounds right......
i think? lol
if you're lowered.. take the fender liner out..
projectpanda13
04-29-2008, 01:43 AM
I ran 50 profile because I though when you plus size, you suppose to decrease by 10. So 205/60/15 => 225/50/16 I mean its about the same height, and I'm only 2 mph front stock. But I rub the fender liner. And I think my wheel bearing is bad. How do I check, it squeels when I turn the wheel. It was so bad during autocross. Latez.
babowc
04-29-2008, 02:19 AM
Wheel bearing is bad?
lift the car and try to shake the wheel back and forth and side to side.
if it exhibits alot of play.. then your bearings are bad.
Trap Star
04-29-2008, 02:30 AM
Does it squeal whenever you turn?
JDori
04-29-2008, 02:52 AM
take out the fender liner
install 40 serious tires
Volcom240sx
04-29-2008, 03:06 AM
too big of tires
side.mission.dori.gang
04-29-2008, 12:38 PM
the liners are usually the first thing to go. also dont forget to move the harness on the drivers side to some place safer that it is.
JDori
04-29-2008, 02:51 PM
driver and passanger
tacos14
04-29-2008, 03:10 PM
did that once rubbed so i took out liner and got smaller tires.
projectpanda13
04-29-2008, 06:37 PM
I guess I'll just take out the liner and move the harness. Thanks. Latez.
Powered by vBulletin® Version 4.1.12 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.