fiberglass

[Casey]

okay where can i get fiberglass local...
like marietta / atlanta / kennesaw ... areas around here...
no more than an hour from marietta
anyoen know where?
i cannot frekin find anywhere
i google mapped and just found people who sell fiberglass tanks or something
so if anyone knows thatd be great
im gonna make fiberglass door and trunk speaker enclosures for meh speakahs
so they sound good...
that is .. once i get speakers
lol

[Dgardi]

No idea.. lol. I can ask around. I'm sure someone I know around here knows.

[v-empire]

walmart, autozone, advance, napa, kmart, homedepot, lowes, and a bunch of other places.......good luck






www.dentsport.com
tora attack factory

[down_shift]

yep any auto body supply place. post pics of your door project.

[v-empire]

i think he meant door and trunk speaker....not door......maybe

but if you are making doors, make a pair for me also. thank you so much, you are the best.

[Casey]

i think he meant door and trunk speaker....not door......maybe

but if you are making doors, make a pair for me also. thank you so much, you are the best.

lmao doors... ><
thatd be kinda hard to do ...
im gonna make enclosures for my speakers so they dont sound like crap
ill check out body shops and homedepot this weekend
i need to get tutorials on how to work fiberglass
project ahead of me for sure
ill put it in my car journal *in sig* when im done

[v-empire]

go to walmart, they have it for sure.

you dont need a tutorial, just wear gloves and a mask or go hardcore and you will figure it out...eventually...kidding.

this is more of a hands on things, so if i show you once, you ll know how to do it. then getting better and reading more about it will make sense
and you will get more ideas after that.

good luck. pm if needed.

[Casey]

go to walmart, they have it for sure.

you dont need a tutorial, just wear gloves and a mask or go hardcore and you will figure it out...eventually...kidding.

this is more of a hands on things, so if i show you once, you ll know how to do it. then getting better and reading more about it will make sense
and you will get more ideas after that.

good luck. pm if needed.

hm aight
well it doesnt have to be pretty its gonna be outa sight for the most part.
and yeah doesnt fiberglass ... like... cut your lungs n stuff if you breath it in? lol so mask for sure and gloves... long sleeve shirt lmao
yeah if i have any issues ill drop you a pm or somethin
thanks

[v-empire]

ahh....i see. thats why i started coughing out blood and the girls i v been dating started getting diarrhea..............

[babowc]

i got a big roll of fiberglass..
my dad's actually.
i forget where he got it from.

got it to build a fish tank.. messy stuff.

[Casey]

ahh....i see. thats why i started coughing out blood and the girls i v been dating started getting diarrhea..............

ew... lmao
nice... um
life experiences


haha neways
babowc
neway you can find out where you got it?

[v-empire]

for your info..fiberglass for a door and trunk enclosure for the speakers costs like $4.99 at walmart. then you need resin and harderner (walmart off shelf chemicals) for like $12 or so.

[Joshua]

Walmart man, how many times does the guy have to tell you?

There's a tutorial on fiberglass kick panels and sub enclosures somewhere on minitruckinweb.com. Can't bother looking.

Peace

[babowc]

walmart for small amounts.
ill ask where he got that huge roll of it..
its about ~5" thick on each side of the roll and nearly 3.5' high.
so... quite alot of fiberglass :)

[v-empire]

lol.....you can make a boat with that.....i need some. :)


door panel speakers, you only need some chop mat fiberglass...and BONDOBONDOBONDOBONDO to finish.

WALMART WALMART WALMART KMART WALMART

[Casey]

lol.....you can make a boat with that.....i need some. :)


door panel speakers, you only need some chop mat fiberglass...and BONDOBONDOBONDOBONDO to finish.

WALMART WALMART WALMART KMART WALMART

hahaha
walmart it is
=D
thanks everyone

[s13z32]

Any boat repair shop will carry the materials you are looking for although you will pay more for them. If you are building speaker pods I suggest using heavier weight cloth than what yuo get at wal mart/advance since it is less likely to delaminate under extreme use. Also any of you that do your own fiberglass work it is a real good idea to use a roller made for such work so you can be sure to get all of the air pockets out of the resin. This will also help prevent delamination.

[babowc]

no.
i ddnt find out where he got it from yet..
im gonna
make
fiberglass
overfenders and sell them.
LORL!

i just got some FRP? overfenders and w t f.. these are flimsy as hell.
i never thought it'd be this flimsy..
made by GTP? importfan.com or something.

[Casey]

no.
i ddnt find out where he got it from yet..
im gonna
make
fiberglass
overfenders and sell them.
LORL!

i just got some FRP? overfenders and w t f.. these are flimsy as hell.
i never thought it'd be this flimsy..
made by GTP? importfan.com or something.

stupid plastic crap
just like fill the inside of it with ... foam or something


DUDE ...
install it, FILL WITH FOAM ... make a mold... sell the fenders =D

[babowc]

lol im going to :)
its really easy to make..

[Casey]

lol im going to :)
its really easy to make..

sweeet lol
make me a bumper
=D

[v-empire]

make a rear diffuser!!!!!!!! so i can buy them ...lol

[Casey]

make a rear diffuser!!!!!!!! so i can buy them ...lol

out of fiber glass?
lmao = crap
im gonna make one out of sheet aluminum when i get a welder and start doing aero stuff
so if you want one in a few months...

[v-empire]

awesome...i want one in aluminum too!

why not fiberglass?

[Casey]

awesome...i want one in aluminum too!

why not fiberglass?

wouldnt fiberglass break?
a diffuser is a flat panel with perpindicular panels to smooth the air as it decompresses from under your car... w/o creating like messy turbulance.... so fiberglass... the joint from where the flat part touches the perpindicular part would like break there... unless you reinforced it somehwo then it would mess with the aero part of it
i bet i could make it in less than 10 pounds =D
i just need a welder and some aluminum sheets ... lol
and you can reinforce the aluminum so it wont flex no matter what from the back side of the aluminum sheeting... possibly some 1/2 inch hollow aluminum square rods or something light like that

[v-empire]

i like it....where do you get all this crazy ideas from? so when can get one?
lol..i need my car ready in a few months...it has to be done

[Casey]

i like it....where do you get all this crazy ideas from? so when can get one?
lol..i need my car ready in a few months...it has to be done

haha umm
i dunno i just think of them?
im gonna weld partial underbody on my car aswell.

i really need to get a welder and start practicing...
so id need to make mine then i could make you one.
ive done some steel welding before... simple stuff ... anyone weld Aluminum before?

[babowc]

OOOO I HAVE!!!!
i put holes through it though!!
does that count?!

[Casey]

OOOO I HAVE!!!!
i put holes through it though!!
does that count?!

lmao
i dunno lol